您好,歡迎來到蘇州天天德州官网版本科技股份有限公司 簡體中文|ENGLISH|日本語

産品中心Product Center

著火危險試驗
應用領域
技術特點
著火危險室的主要設備有單根電線燃燒室、灼熱絲測試儀、針焰測試儀和漏電起痕測試儀。
單根電線燃燒室滿足標准UL1581、UL2556中對于水平、垂直燃燒設備的要求。灼熱絲測試儀滿足GB5169.10、GB4706等標准中的試驗要求,測試溫度可以達到1000度。針焰測試儀滿足GB5169.5、GB4706等標准中的試驗要求,該試驗主要針對PCB板的基材及其他關鍵材料。漏電起痕測試儀滿足GB4207、GB4706等標准中的試驗要求。

The single-wire flame-hood is specially used for UL flame test. It followed the vertical and horizontal flame test requirements of UL standard such as UL1581 and UL2556. The glow-wire tester followed the glow-wire test requirements of standard IEC60695-2-10, IEC60335, IEC60950, etc. The temperature range is from room temperature to 1000 ℃. The needle-flame tester followed the needle-flame test requirements of standard IEC60695-2-10, IEC60335 and etc. This test is conducted on the base material of PCB, and other critical material. The tracking index tester followed the requirements of standard IEC60112, IEC60335 and etc.


聯系我們

地址:蘇州高新區科技城雁蕩山路88號
郵編:215153
電話:0512-68418888
傳真:0512-68419999
E-mial:public@lzy.cn
投訴、舉報電話:18913132601
郵箱:audit@lzy.cn

Copyright ? 2013 苏州路之遥科技股份有限公司版权所有. LZY All Rights Reserved. 蘇ICP備11010942號